Rocket Bunny | Pandem Mazda RX-7 FC3S Kouki V1.5 Widebody Kit
Transform the later-model Mazda RX-7 FC3S with the authentic PANDEM FC3S Kouki V1.5 Widebody Kit, available through TRACKUZA.
Designed by Kei Miura of TRA Kyoto, the V1.5 package gives the second-generation RX-7 a dramatically wider and more aggressive appearance. The replacement front bumper, auxiliary headlight conversion, side skirts, rear aero piece, and approximately +50 mm front and +90 mm rear fender extensions create a complete foundation for a street, show, drift, or track-inspired rotary build.
Optional V1 and V1.5 rear-wing components are available. The V1 rear wing is required to install the V1.5 rear-wing extension.
Vehicle Fitment
- 1985–1992 Mazda RX-7
- Mazda FC3S chassis
- Later-model Kouki application
- Two-door coupe
- Professional installation required
The FC3S received different body, bumper, trim, and lighting configurations during its production run. Customers should verify that their vehicle uses the applicable later-model Kouki front-end configuration before ordering.
Kit Components
The PANDEM Mazda RX-7 FC3S Kouki V1.5 Widebody Kit includes:
- Front bumper
- Front turn-signal lights
- Auxiliary headlight mounts
- Auxiliary headlight set
- Front overfenders: approximately +50 mm
- Side skirts
- Rear overfenders: approximately +90 mm
- Rear aero piece
Optional Rear-Wing Components
- V1 rear wing
- V1.5 rear-wing extension
Important: The V1.5 rear-wing component cannot be installed by itself. The PANDEM V1 rear wing is required as the base for V1.5 installation.
Review the selected product configuration before checkout to confirm which rear-wing components have been added.
PANDEM FC3S V1.5 Design
The V1.5 package combines the original FC3S V1 widebody design with an upgraded rear-wing configuration.
Key features include:
- Replacement front bumper
- Auxiliary headlight conversion
- Approximately +50 mm front overfenders
- Side skirts
- Approximately +90 mm rear overfenders
- Rear aero piece
- Optional two-stage V1 and V1.5 rear-wing assembly
Each authentic PANDEM component is designed by Kei Miura and supplied through TRA Kyoto in Kyoto, Japan.
Estimated Lead Time
Estimated delivery time: approximately 4–12 weeks
Actual fulfillment timing may vary depending on:
- TRA Kyoto production schedules
- Current component availability
- Selected rear-wing configuration
- International freight scheduling
- Customs and import processing
- Warehouse handling
- Domestic delivery coordination
Customers should not schedule bodywork, paint, wheel ordering, or installation until every component has arrived and been inspected.
Professional Installation Required
The PANDEM Mazda RX-7 FC3S V1.5 kit is a complete widebody and exterior conversion. It is not a simple bolt-on cosmetic package.
Installation may require:
- Cutting or trimming the factory front and rear body panels
- Modifying and sealing the inner-fender areas
- Fitting and aligning the replacement front bumper
- Installing the turn-signal lights
- Installing and wiring the auxiliary headlights
- Drilling and permanently mounting the overfenders
- Fitting and aligning the side skirts
- Installing the rear aero piece
- Mounting and reinforcing the optional V1 rear wing
- Installing the V1.5 wing component onto the V1 wing
- Test-fitting every component before paint
- Sanding, filling, and surface correction
- Professional fabrication and bodywork
- Paint and refinishing
- Wheel and tire fitment changes
- Suspension and alignment adjustments
Minor imperfections may be present and could require professional correction during preparation and installation.
Because FC3S RX-7s are now older vehicles, previous repairs, corrosion, accident damage, replacement panels, and body variations may affect final fitment.
TRACKUZA strongly recommends installation by an experienced RX-7, widebody, fabrication, collision-repair, restoration, or motorsports facility.
Wheel and Tire Planning
The approximately +50 mm front and +90 mm rear fender extensions allow for a substantially more aggressive wheel and tire configuration than the factory FC3S body.
Final fitment depends on:
- Wheel diameter
- Wheel width and offset
- Tire size and measured width
- Suspension configuration
- Ride height
- Camber settings
- Brake clearance
- Steering clearance
- Fender mounting position
- Intended street, show, drift, or track use
TRACKUZA recommends test-fitting the complete widebody package and completing a professional wheel-fitment assessment before purchasing custom wheels and tires.
Build Your Mazda RX-7 with TRACKUZA
TRACKUZA can assist with supporting components for a complete FC3S project, including:
- Custom forged wheels
- Performance tires
- Coilovers and suspension upgrades
- Adjustable suspension components
- Brake upgrades
- Exhaust systems
- Racing seats and harnesses
- Steering wheels
- Lighting components
- Track and safety equipment
Contact TRACKUZA for assistance with Kouki fitment verification, rear-wing selection, product availability, wheel planning, freight coordination, or supporting build components.
Shipping Information
- Orders will only be shipped to confirmed billing addresses.
- Pickup requests may be available for Nevada orders.
- Only orders within the United States will be accepted.
- Qualifying orders within the contiguous United States will have no shipping charge.
- Alaska and Hawaii are excluded and may require separate shipping arrangements.
Customers should confirm all billing, delivery, and contact information before fulfillment begins.
Cancellation and Refund Policy
- Cancellations are accepted only before the order has shipped.
- Approved cancellations may be subject to a 20% restocking fee.
- Once an order has shipped, it is no longer eligible for cancellation or refund.
Customers should verify vehicle fitment, kit configuration, rear-wing selection, installation requirements, and estimated lead time before placing an order.
California Proposition 65 Warning
This product may expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit:
https://www.p65warnings.ca.govMost of our kits from Liberty Walk and Rocket Bunny are made to order. We have about a 4 to 7 weeks of build time and about a 1 week shipping time frame, if you want to get it by air. Shipping can be from $1000 to $3500 if you pick the air freight option. We do offer a different ship-by-ocean container option but that can take 1 to 3 months of waiting time. Before purchase please contact our team using the website Whatsapp badge located on the bottom right of the site. Shipping payment will be confirmed by our team when the kit has been completed and we will reach out to you for payment.
