{"title":"NISSAN Z","description":"","products":[{"product_id":"ams-performance-nissan-z-can-bus-flex-fuel-kit-w-fuel-filter","title":"AMS Performance Nissan Z CAN Bus Flex Fuel Kit w\/ Fuel Filter","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAutomated Ethanol Content Monitoring and Compensation with Integrated Fuel Filtration\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake the guesswork out of running ethanol-based fuels with the AMS Performance CAN Bus Flex Fuel Kit for the Nissan Z — now bundled with our high-performance in-line fuel filter for complete protection and reliability. This all-in-one solution lets you run gasoline, E85, or any blend in between (0–100% ethanol), while the system automatically adjusts fueling, boost, and timing in real-time based on ethanol content. No manual calculations or switching maps are required — just fuel up and drive. The kit is fully compatible with EcuTek tuning software, making calibration simple and seamless.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEthanol’s cleaning properties can dislodge years of sediment from fuel tanks and lines, potentially causing damage to injectors or internal components. That’s why we include our AMS in-line fuel filter — a critical safeguard designed specifically for the VR30 engine. It helps prevent common OEM fuel system failures often seen with ethanol use, especially at higher blends like E50 or E85. With integrated CAN bus support, the system also provides three analog inputs for additional sensors or failsafe programming. Everything you need is included: AMS CAN bus box, ethanol sensor, fuel filter, braided fuel lines, plug-and-play wiring harness, and hardware. This is the ultimate set-it-and-forget-it flex fuel upgrade — engineered for power, protection, and peace of mind.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eAllows for e50, e85, e98, or any mixture of fuels from pump gas to full ethanol\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eZero Wiring Necessary with our Completely Plug \u0026amp; Play Wiring Harness\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eHighest filtering effectiveness on the market with a 6 micron filter\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGlass filter element material for 100% ethanol compatibility\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eFully integrates via CAN bus with EcuTek ECU software for a seamless solution\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCapable of three additional 0-5v analog inputs for increased safety and functionality\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMonitor fuel pressure, coolant pressure, or any other 0-5V analog input\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUses race grade AN fittings and aluminum quick connect fittings for easy install and leak-free operation\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCNC-machined fuel filter housing features a built-in mounting solution to secure the unit and lines from dangerous movement\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUtilizes all race grade black nylon coated ethanol compatible -6AN braided hose\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eStainless steel and CNC machined anodized aluminum brackets secure the kit from movement\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eBolt-in install with no permanent modification to vehicle required\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":48011641520282,"sku":"AMS.47.07.0007-2","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_35_AMS-Performance-Nissan-Z-CAN-Bus-Flex-Fuel-Kit-with-Fuel-Filter-1.jpg?v=1778504806"},{"product_id":"ams-performance-nissan-z-can-bus-flex-fuel-kit-w-fuel-filter-copy","title":"AMS Performance Nissan Z CAN Bus Flex Fuel Kit","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAutomated Ethanol Content Monitoring and Compensation\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRun E85 straight from the pump without having to worry about manually calculating your ethanol content percentage! With the AMS CAN Bus Flex Fuel Kit you can run gasoline, E85, or any mixture of gas and ethanol with a content rating from 0 to 100% ethanol. Our flex fuel system’s ethanol sensor and electronics instruct your vehicle’s ECU on how to adjust parameters like fueling, boost, and timing to produce the most power possible for a given fuel or mixture of fuels. These adjustments happen seamlessly in the background of your flex fuel tune, allowing you to be flexible with what fuel you utilize in your RZ34. This flex-fuel system is truly set-it-and-forget-it — once installed and tuned, no further adjustments are needed. With CAN bus integration, it also provides three additional analog inputs for monitoring and failsafe settings, ensuring optimal performance and reliability. The complete kit includes the AMS CAN bus box, ethanol sensor, braided fuel lines, hardware, and a plug \u0026amp; play wiring harness for an easy and quick install. Our AMS Calibration team has spent countless hours working with EcuTek on their flex fuel development program, meaning the AMS Nissan Z Flex Fuel Kit is now directly compatible with EcuTek calibration software, making tuning a breeze.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eAllows for e50, e85, e98, or any mixture of fuels from pump gas to full ethanol\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eZero Wiring Necessary with our Completely Plug \u0026amp; Play Wiring Harness\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eFully integrates via CAN bus with EcuTek ECU software for a seamless solution\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCapable of three additional 0-5v analog inputs for increased safety and functionality\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMonitor fuel pressure, coolant pressure, or any other 0-5v analog input\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUses race grade AN fittings and aluminum quick connect fittings for easy install and leak-free operation\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUtilizes all race grade black nylon coated ethanol compatible -6AN braided hose\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eStainless steel and CNC machined anodized aluminum brackets secure the kit from movement\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eBolt-in install with no permanent modification to vehicle required\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":48011642208410,"sku":"AMS.47.07.0006-2","price":699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_27_AMS-Performance-Nissan-Z-CAN-Bus-Flex-Fuel-Kit-1.jpg?v=1778505267"},{"product_id":"ams-performance-can-bus-box-pressure-sensor-add-on-1","title":"AMS Performance CAN Bus Box Pressure Sensor Add-On","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIncreased Safety Through Additional Available Data\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake your AMS CAN Flex Fuel Kit to the next level with the AMS Performance CAN Bus Box Pressure Sensor Add-On. Engineered for enthusiasts who demand more data and better protection, this plug-and-play upgrade adds support for up to three additional sensors via the CAN network — delivering real-time insights to keep your engine safe and running strong. Included in the kit is a premium 150psi pressure sensor, IP67 rated and accurate to within ±0.15%, making it ideal for fuel pressure monitoring. Additional sensors can be added separately to track parameters like crankcase pressure or turbo speed, depending on your setup and goals. Whether you’re pushing your build on the street or at the track, this powerful sensor expansion unlocks critical data channels and enables failsafe features to safeguard your engine when it matters most.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eZero Wiring Necessary with our Completely Plug \u0026amp; Play Wiring Harness\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eIncludes One IP67 rated 150 PSI Pressure Sensor and Inline -6AN Adapter Fitting\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eFully integrates via CAN bus with EcuTek ECU software for a seamless solution\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCapable of up to three 0-5v analog inputs for increased safety and functionality\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMonitor fuel pressure, coolant pressure, or any other 0-5v analog input\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eBolt-in install with no permanent modification to the vehicle required\u003c\/h6\u003e\n\u003cdiv data-slick='{\"prevArrow\":\"\u0026lt;button type=\\\"button\\\" class=\\\"slick-prev slick-arrow\\\"\u0026gt;\u0026lt;\\\/button\u0026gt;\",\"nextArrow\":\"\u0026lt;button type=\\\"button\\\" class=\\\"slick-next slick-arrow\\\"\u0026gt;\u0026lt;\\\/button\u0026gt;\"}' id=\"slick-slider-1\" class=\"slick-slider slick-slider--size-full slick-initialized\"\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eEnables additional functionality of the existing AMS Performance CAN bus Flex Fuel Kit\u003c\/h6\u003e\n\u003cdiv class=\"slick-slider-wrapper\"\u003e\n\u003cdiv data-slick='{\"prevArrow\":\"\u0026lt;button type=\\\"button\\\" class=\\\"slick-prev slick-arrow\\\"\u0026gt;\u0026lt;\\\/button\u0026gt;\",\"nextArrow\":\"\u0026lt;button type=\\\"button\\\" class=\\\"slick-next slick-arrow\\\"\u0026gt;\u0026lt;\\\/button\u0026gt;\"}' id=\"slick-slider-1\" class=\"slick-slider slick-slider--size-full slick-initialized\"\u003e\n\u003cdiv class=\"slick-list draggable\"\u003e\n\u003cdiv class=\"slick-track\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":48011650629786,"sku":"AMS.00.13.0001-1","price":234.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_67_AMS-Performance-CAN-bus-Box-Pressure-Sensor-Addon-Env-3-2048x1366.jpg?v=1778505874"},{"product_id":"ams-performance-inline-fuel-pulsation-damper","title":"AMS Performance Inline Fuel Pulsation Damper","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAn inline solution for reducing fuel line hammering and NVH.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AMS Performance Inline Fuel Pulsation Damper is the solution to unwanted fuel system noise, vibration, and harshness (NVH) caused by fuel line hammering in high-performance applications. Engineered to minimize or eliminate pressure spikes in the fuel system, this damper features a high-flow stainless steel internal valve specifically designed to work with high-pressure fuel pumps. It utilizes a durable billet 6061 aluminum body with a fully anodized gloss black finish for long-lasting performance and a clean look. Available with an inline -6AN male inlet and -6AN ORB outlet, or a 5\/16 Quick Connect Inlet and -6AN ORB outlet, it’s easy to integrate into existing setups and is a direct bolt-in solution for AMS VR30DDTT fuel system-equipped vehicles. The AMS Inline Fuel Pulsation Damper offers a reliable, long-term solution for stabilizing fuel delivery and eliminating fuel line NVH at idle, under load, or across various RPM ranges.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eMinimizes or Eliminates Fuel Hammering and Fuel System NVH\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eInline\u003cspan\u003e \u003c\/span\u003e\u003cspan data-teams=\"true\"\u003e-6an Male or 5\/16 Quick Connect Inlet with a -6an ORB Outlet\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan data-teams=\"true\"\u003eHigh Flow Stainless Steel Internal Damper Valve Spec’d for High Pressure Fuel Pumps\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan data-teams=\"true\"\u003eBillet 6061 Body with Fully Anodized Gloss Black Housing\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eEasy Bolt-in Install for AMS VR30DDTT Fuel System Vehicles (See fitment guide below)\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Is Fuel Line Hammering?\u003c\/h3\u003e\n\u003cp\u003eFuel line hammering, also known as fuel pulsation NVH, or fuel line knock, is a rhythmic ticking or knocking noise caused by pressure spikes within the fuel system. These spikes are often the result of the rapid opening and closing of fuel injectors or the operation of a high-pressure fuel pump, both of which can generate shock waves that resonate through the fuel lines. This issue can occur at idle or become more pronounced at certain RPMs, depending on engine load and fuel system components and plumbing. It’s particularly common in high-performance modified setups where fuel flow dynamics are more aggressive. Symptoms may include audible noise, fluctuating fuel pressure readings, and potentially increased stress on fuel system components. The AMS Performance Inline Fuel Pulsation Damper is specifically engineered to absorb these pressure pulses, reducing noise, stabilizing fuel pressure, and promoting smoother, more consistent engine performance.\u003c\/p\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe AMS Performance Inline Fuel Pulsation Damper was developed for, and has only been tested on, Nissan’s VR30DDTT engine with AMS Performance High Pressure Fuel Pump upgrades. It has been optimized to fit with only the AMS line of VR30DDTT High Pressure Fuel Pumps, fuel lines, filter kits, and other AMS fuel system components. Usage of the AMS Inline Fuel Pulsation Damper with OEM or non-AMS fuel system components is not recommended, as compatibility, safety, and performance cannot be verified across other system configurations.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eIn certain configurations, the OEM high pressure fuel pump used on the VR30DDTT engine has been observed to structurally fail when paired with the AMS Inline Fuel Pulsation Damper. Because this may present a risk of fuel leakage and fire, use of the AMS Inline Fuel Pulsation Damper with the OEM high pressure fuel pump is explicitly not recommended.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"87\" data-end=\"99\"\u003eWarning:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBy purchasing this fuel system component you confirm that you have read and understand the following:\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"204\" data-end=\"223\"\u003eWarning\/Danger:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSerious risk of fire, explosion, bodily injury including resulting death, and engine, vehicle, and other property damage. This fuel system component must be installed and removed\u003cspan\u003e \u003c\/span\u003e\u003cem data-start=\"403\" data-end=\"409\"\u003eonly\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eby a qualified motorsport technician. The technician also must be trained in how to install and remove this component from this specific vehicle. The technician must not participate in any activity that would be considered a catalyst for ignition while installing or removing this component and must read the installation instructions before installation or removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Guide\u003c\/h3\u003e\n\u003cp\u003eInfiniti Q50\/Q60 w\/ AMS Stage 1 High Pressure Fuel Pump:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-3\u003c\/strong\u003e\u003cbr\u003eInfiniti Q50\/Q60 w\/ AMS Stage 2 High Pressure Fuel Pump:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-3\u003c\/strong\u003e\u003cbr\u003eInfiniti Q50\/Q60 w\/ AMS Stage 3 High Pressure Fuel Pump:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNissan Z w\/ AMS Stage 1 High Pressure Fuel Pump and AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.47.07.0009-2\u003c\/strong\u003e\u003cbr\u003eNissan Z w\/ AMS Stage 2 High Pressure Fuel Pump and AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.47.07.0009-2\u003c\/strong\u003e\u003cbr\u003eNissan Z w\/ AMS Stage 3 High Pressure Fuel Pump and AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNissan Z w\/ AMS Stage 1 High Pressure Fuel Pump and -NO- AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-3\u003c\/strong\u003e\u003cbr\u003eNissan Z w\/ AMS Stage 2 High Pressure Fuel Pump and -NO- AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-3\u003c\/strong\u003e\u003cbr\u003eNissan Z w\/ AMS Stage 3 High Pressure Fuel Pump and -NO- AMS Fuel Filter:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAMS.00.07.0002-2\u003c\/strong\u003e\u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"-06 AN Female Inlet to -06 AN Male Outlet","offer_id":48011670749338,"sku":"AMS.00.07.0002-2","price":109.95,"currency_code":"USD","in_stock":true},{"title":"5\/16 Quick Connect Inlet to -06 AN Male Outlet","offer_id":48011670782106,"sku":"AMS.00.07.0002-3","price":109.95,"currency_code":"USD","in_stock":true},{"title":"5\/16 Quick Connect Inlet to -06 AN Male Outlet Includes -06 Fuel Line","offer_id":48011670814874,"sku":"AMS.47.07.0009-2","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_109_AMS-Performance-6AN-Fuel-Pulsation-Damper-VR30-VR30DDTT-Infiniti-Q50-Q60-Nissan-Z-Env-8-1536x1025_57c31886-248a-4798-8a81-9f98df3e90c3.jpg?v=1778506839"},{"product_id":"ams-performance-nissan-z-in-tank-fuel-pump-system","title":"AMS Performance Nissan Z In-Tank Fuel Pump System","description":"\u003ch4\u003e\u003cem\u003eMaximize your VR30 fuel system to support 1000+ WHP\u003c\/em\u003e\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003eThe factory fuel pump system in the Nissan Z leaves a lot to be desired. The factory system utilizes a small single low pressure fuel pump, which simply is not enough to support an upgraded HPFP, or aftermarket port injection systems\u003c\/strong\u003e\u003cstrong\u003e. Our AMS Snailworks® Engineering Team took this as an opportunity to not only increase the total throughput of the fuel pump system, but to do it in such a way that all of the OEM functionality is not just retained, but improved. Gone are the days of being required to keep your fuel tank filled to a minimum of a half tank, hacking up your factory pump basket, or being forced to use an external fuel surge tank mounted in the trunk. Allowing for massive fuel flow, the single pump system supports 800 HP, while the dual pump system is capable of supporting an astounding 1400 HP and is the perfect match for aftermarket port injection systems. Available as a single pump or dual pump system, the AMS Performance Nissan Z In-Tank Fuel Pump System is the perfect solution to meet your fuel delivery needs.\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003eDual Pump System Supports 1400 HP of Fuel Delivery on Gasoline and 1100 HP on e85\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eSingle Pump System Supports 800 HP of Fuel Delivery on Gasoline and 600 HP on e85\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eIncludes Injection Molded Engineering Thermoplastic Basket to Combat Fuel Starvation\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eNearly Quadruples the Pump Basket Size over OEM (+296%) and Retains “Surge Tank” Properties Unlike Competitors\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eImproves Upon the Factory Siphon System with PTFE Hose and Improved Pickup Locations for Excellent Basket Filling\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eCNC Machined Red Anodized Billet Aluminum Fuel Pump Assembly Top Hat\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eUtilizes Plug ‘n Play Electrical Harnesses and Quick Connect Fuel Fittings for Easy Install\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eUtilizes Industry Standard Made in USA Walbro 450 LPH Fuel Pump(s)\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eAll Materials and Components are Fully Ethanol and Methanol-Compatible\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003eAllows for Conversion to Return-Style Fuel Line Plumbing to Support Port Injection Installations\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered To Be The Best\u003c\/h3\u003e\n\u003cp\u003eAMS Performance is an engineering company first. We have built our over 20 year reputation as a leading motorsports aftermarket component manufacturer by creating the highest performing parts through a focused engineering approach to design. This design method allows us to include features not found in any other kits on the market, including motorsports quality plug-n-play harnesses, engineering thermoplastic replacement pump baskets, PTFE fuel lines, AN and quick connect fitting connections, and a CNC machined billet aluminum bulkhead top hat engineered via Solidworks© Computer-Aided Design (CAD) software. Where others may use low quality components and questionable engineering principles, we have put together a system that rises above the competition, for years of trouble-free operation.\u003c\/p\u003e\n\u003cp\u003eOur AMS Snailworks® Engineering Team identified the shortcomings of the factory fuel pump system and seized the opportunity to revolutionize it. The original fuel pump system in the Nissan Z falls short of expectations. Equipped with a small single fuel pump, the factory system lacks the capacity to support higher horsepower levels, and many enthusiasts experience fuel starvation when the tank is below half full. Our solution ensures ample fuel flow, with the single pump system accommodating up to 800 HP, while the dual pump system astonishingly supports 1400 HP, making it an ideal companion for aftermarket port injection systems.\u003c\/p\u003e\n\u003ch3\u003eNo More Fuel Starvation Under a Half Tank\u003c\/h3\u003e\n\u003cp\u003eThe AMS Performance Nissan Z In-Tank Fuel System has been developed by our talented AMS Snailworks® Engineering Team as a complete system, instead of just an add-on pump like our competitors. The benefit of developing a system in this manner is that we can reimagine how the system fits and works together to optimize fuel flow, drivability, and ease-of-use. Our team found a number of components within the factory fuel system that our reimagined AMS fuel system reroutes, removes, or replaces to vastly increase system performance, keeping the fuel pump assembly full of fuel at all times.\u003c\/p\u003e\n\u003cp\u003eA key feature of the AMS In-Tank Fuel Pump System is improved siphon system functionality to combat the extremely common issue of fuel starvation when fuel levels drop below half a tank. This is accomplished by completely redesigning the system from the ground up with a proprietary siphon routing solution. Say goodbye to the inconvenience of maintaining a minimum half tank of fuel or resorting to external surge tanks in the trunk. Our team extended the factory pickup on the left side of the tank and then added an all-new secondary pickup for the right side of the tank to increase overall flow. Both of these pickups have been strategically located at the rear of the tank, accounting for fuel to naturally slosh to the rear when launching or accelerating the vehicle. These siphon pickups deliver fuel directly to the pumps, filling our oversized fuel pump basket at all times – even under demanding racing conditions.\u003c\/p\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReturn-style configuration of this LPFP system requires custom fabrication of a new feed line underneath the chassis from fuel tank to engine bay, and various under hood fuel lines, fittings, and fuel pressure regulator to be plumbed. We recommend that ONLY qualified motorsport technicians attempt this installation, as there is no instruction provided.\u003c\/li\u003e\n\u003cli\u003eSome images depict components for either single or dual pump systems, and\/or Infiniti Q fitment product. Images are for illustrative purposes only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWARNING: By purchasing this fuel system component you confirm that you have read and understand the following: \u003cstrong\u003e\u003cu\u003eWARNING\/DANGER\u003c\/u\u003e\u003c\/strong\u003e: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY, INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FLEX FUEL KIT MUST BE INSTALLED AND REMOVED\u003cstrong\u003e\u003cem\u003e ONLY\u003c\/em\u003e\u003c\/strong\u003e BY A \u003cstrong\u003e\u003cem\u003eQUALIFIED MOTORSPORT TECHNICIAN\u003c\/em\u003e\u003c\/strong\u003e. THE TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS KIT FROM THIS SPECIFIC VEHICLE. THE TECHNICIAN MUST NOT PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING THIS KIT AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.\u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"SINGLE PUMP","offer_id":48011686641818,"sku":"AMS.47.07.0020-1","price":1399.95,"currency_code":"USD","in_stock":true},{"title":"DUAL PUMP","offer_id":48011686674586,"sku":"AMS.47.07.0021-1","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_77_AMS-Performance-VR30-In-Tank-Fuel-Pump-System-14.jpg?v=1778507430"},{"product_id":"ams-performance-vr30ddtt-stage-1-high-pressure-fuel-pump","title":"AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCFD-optimized, E-85 compatible, and all laser-welded stainless steel construction.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt’s simple, if you want to make more power you are going to need more fuel. The AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump features high quality all stainless steel construction and is capable of fuel flow at over 338 liters per hour, and allows for 180 bar of fuel pressure.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003ePartnering with Nostrum High Performance, an industry leader in fuel system technology, we have been able to bring reliable high-performance high-pressure fueling solutions to the VR30 platform. The AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump allows for fuel flow supporting our ALPHA 5 or RA500 packages for the Nissan Z and Infiniti Q50\/Q60, or for builds looking to maximize performance on the stock turbos with e85. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eSuited for ALPHA 5\/RA500 Packages\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGreat for Stock Turbo FBO Builds up to 500 WHP on E85\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eE-85 \/ Flex Fuel Compatible\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCapable of Flowing Over 338 LPH\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e180 Bar Maximum Operating Pressure\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCFD Optimized Design\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eAll Stainless Steel Construction\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eLaser Welds Mean the Pump is Sealed with no Leaks\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eLimited Lifetime Warranty¹\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eComes Fully Assembled With Installation Hardware\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMounting Flange and Electric Harness Adapter Included\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUtilizes OEM-type Low and High Pressure Fittings\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eEach Individual Unit is Flow Tested\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered to be the Best\u003c\/h3\u003e\n\u003cp\u003eWe partnered with an industry leader in fuel pumps,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.nostrumshop.com\/\" rel=\"noopener\" target=\"_blank\"\u003eNostrum High Performance\u003c\/a\u003e, in the development of this component. For this reason, our customers know that they can rely on our fuel pumps to be the best built, best performing on the market.\u003c\/p\u003e\n\u003cp\u003eThrough the use of Computational Fluid Dynamics (CFD) the AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump mapping shows the optimized fuel flow trajectories. Our pump piston diameter yields an incredible rate of 338 LPH!\u003c\/p\u003e\n\u003cp\u003eThe AMS VR30 pumps come fully assembled for a quick, bolt-on upgrade and use all OEM type fuel fittings and electrical connectors. The AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump upgrade utilizes OEM-type low and high-pressure fittings. Each individual pump is flow tested to ensure the ultimate in performance, and comes with comprehensive installation instructions to make install a breeze. The pump has an incredible maximum operating pressure of 180 bar!\u003c\/p\u003e\n\u003ch3\u003ePut it to the Test\u003c\/h3\u003e\n\u003cp\u003eWhat sets this and every AMS component apart from the competition is our rigorous battery of tests. The AMS Performance VR30DDTT Stage 1 High Pressure Fuel Pump has been tested in-house with countless 1\/4 and 1\/2 mile runs! In addition to this research and development testing, all AMS VR30 High-Pressure Fuel Pumps are bench tested by Nostrum High Performance before shipping as part of their extensive quality control process to ensure the highest level of durability. The best part — a Limited Lifetime Warranty¹ against manufacturer’s defects is included at no additional cost.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2017+ INFINITI Q60 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003cli\u003e2016+ INFINITI Q50 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003cli\u003e2023+ Nissan Z (incl. all submodels)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn order to take full advantage of our HPFP, specific calibrations to your ECU tune file will need to be made. Once the HPFP is installed, the engine will start and run, however a qualified engine calibrator must review datalogs to verify the engine is running properly! Please contact an AMS sales representative to discuss your ECU tuning needs by emailing\u003cspan\u003e \u003c\/span\u003esales@amsperformance.com.\u003c\/li\u003e\n\u003cli\u003ePlease be aware that there are two separate instruction guide files available for this product. The first is a physical installation guide, and the second is a calibration quick-start guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¹ Limited Lifetime Warranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNostrum High Performance warrants to the consumer that this product will be free from defects in materials and workmanship for the lifetime of the product.  This Limited Lifetime Warranty is limited to the repair or replacement of the part. In no event shall the manufacturer be responsible for special, incidental or consequential damages or costs incurred due to failure of this product. Limited Lifetime Warranty claims to the manufacturer must be transportation prepaid and accompanied by dated proof of purchase. This Limited Lifetime Warranty applies only to the original purchaser of the product and is non-transferable.\u003c\/li\u003e\n\u003cli\u003eProducts will be repaired or replaced when determined by the manufacturer that the product failed because of defects in material or workmanship. Limited Lifetime Warranty explicitly excludes the cost of labor for product installation and removal, diagnostics, or troubleshooting.\u003c\/li\u003e\n\u003cli\u003eThe Limited Lifetime Warranty covers manufacturing defects, but damage caused by foreign object debris, from other fuel line components or installation contamination, will not be covered under this limited warranty.\u003c\/li\u003e\n\u003cli\u003eNo warranty, express or implied, shall extend to any product which has been subjected to misuse, neglect, accident, or improper storage or installation or which has been repaired, modified, altered, tampered with, misused, improperly installed, or used in an improper application. The manufacturer disclaims any liability for consequential damages due to breach of any written or implied warranty on all products made by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eTo begin the warranty process, you may contact an AMS Performance Customer Support Representative\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/support\"\u003eHERE\u003c\/a\u003e. The following additional information will be required to process the Limited Lifetime Warranty claim and confirm eligibility to provide further warranty inspection.\u003cbr\u003e– Original invoice, purchase date, and product installation date.\u003cbr\u003e– Diagnostic information, testing data, codes, freeze data.\u003cbr\u003e– ECU calibration file (if possible)\u003cbr\u003e– Data logs of the event\u003cbr\u003e– Full mod list including part specifics\u003cbr\u003e– Persons\/company that tuned the vehicle\u003c\/li\u003e\n\u003cli\u003eOnce approved, a Nostrum High Performance RMA form is required to be filled out and included with the returned part. Additional information may be required in order to test the failed component and process the claim. All approved components will be be shipped directly to Nostrum High Performance at the expense of the consumer for inspection and subsequent repair or replacement if deemed necessary.\u003c\/li\u003e\n\u003cli\u003eIn the case that the product requires inspection performance testing, and no damage, fault, or defect in operation is found, Nostrum High Performance, at its sole discretion, may apply a Test Service Charge of $125.00 USD and shipping will be the sole responsibility of the consumer. Payment of this fee directly to Nostrum High Performance is required prior to the return of the inspected product to the consumer.\u003c\/li\u003e\n\u003cli\u003eFor further warranty information, please see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/nostrumshop.com\/warranty\/\" rel=\"noopener\" target=\"_blank\"\u003enostrumshop.com\/warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWARNING\/DANGER\u003c\/u\u003e\u003c\/strong\u003e: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED\u003cstrong\u003e\u003cem\u003e ONLY\u003c\/em\u003e\u003c\/strong\u003e BY A \u003cstrong\u003e\u003cem\u003eQUALIFIED MOTORSPORT TECHNICIAN\u003c\/em\u003e\u003c\/strong\u003e. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING THE PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.\u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":48011698995354,"sku":null,"price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_20_AMS-RA338-pump-6-copy.jpg?v=1778508312"},{"product_id":"ams-performance-vr30ddtt-stage-1-high-pressure-fuel-pump-copy","title":"AMS Performance VR30DDTT Stage 2 High Pressure Fuel Pump","description":"\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eCFD-optimized, E-85 compatible, and all laser-welded stainless steel construction.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003eIt’s simple, if you want to make more power you are going to need more fuel. The AMS Performance VR30DDTT Stage 2 High Pressure Fuel Pump Kit features high-quality all stainless steel construction and is capable of fuel flow at over 338 liters per hour and allows for 240 bar of fuel pressure. \u003c\/strong\u003e\u003cstrong\u003ePartnering with Nostrum High Performance, an industry leader in fuel system technology, we have been able to bring reliable high-performance high-pressure fueling solutions to the VR30 platform. The AMS Performance VR30DDTT Stage 2 High-Pressure Fuel Pump allows for fuel flow supporting our ALPHA 6 or RA600 packages for the Nissan Z and Infiniti Q50\/Q60, or for builds looking to maximize performance on the stock turbos with e85. \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eSuited for ALPHA 6 \/ RA600 Packages\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eGreat for Mild Turbo Upgrade Builds up to 600 WHP on e85\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003ePerfect Upgrade over Stage 1 for Max Effort Stock Turbo Builds on e85\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eE-85 \/ Flex Fuel Compatible\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eCapable of Flowing Over 338 LPH\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eAllows for 240 bar of Fuel Pressure\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eCFD Optimized Design\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eAll Stainless Steel Construction\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eLaser Welds Mean the Pump is Sealed with no Leaks\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eLimited Lifetime Warranty¹\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eComes Fully Assembled With Installation Hardware\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eMounting Flange and Electric Harness Adapter Included\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eUtilizes OEM-type Low and High Pressure Fittings\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eEach Individual Unit is Flow Tested and Inspected\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered to be the Best\u003c\/h3\u003e\n\u003cp\u003eWe partnered with an industry leader in fuel pumps,\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.nostrumshop.com\/\" target=\"_blank\"\u003eNostrum High Performance\u003c\/a\u003e, in the development of this component. For this reason our customers know that they can rely on our fuel pumps to be the best built, best performing on the market.\u003c\/p\u003e\n\u003cp\u003eThrough the use of Computational Fluid Dynamics (CFD) the AMS Performance VR30DDTT Stage 2 High Pressure Fuel Pump mapping shows the optimized fuel flow trajectories. Our pump piston diameter yields an incredible rate of 338 LPH!\u003c\/p\u003e\n\u003cp\u003eThe AMS VR30 pumps come fully assembled for a quick, bolt-on upgrade and use all OEM type fuel fittings and electrical connectors. The AMS Performance VR30DDTT Stage 2 High-Pressure Fuel Pump upgrade utilizes OEM-type low and high pressure fittings. Each individual pump is flow tested to ensure the ultimate in performance, and comes with comprehensive installation instructions to make installation a breeze. The pump has an incredible maximum operating pressure of 240 bar!\u003c\/p\u003e\n\u003ch3\u003ePut it to the Test\u003c\/h3\u003e\n\u003cp\u003eWhat sets this and every AMS component apart from the competition is our rigorous battery of tests. The AMS Performance VR30DDTT Stage 2 High-Pressure Fuel Pump has been tested in-house with countless 1\/4 and 1\/2 mile runs! In addition to this research and development testing, all AMS VR30 High Pressure Fuel Pumps are bench tested by Nostrum High Performance before shipping as part of their extensive quality control process to ensure the highest level of durability. The best part — a Limited Lifetime Warranty¹ against manufacturer’s defects is included at no additional cost.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2017+ INFINITI Q60 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003cli\u003e2016+ INFINITI Q50 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003cli\u003e2023+ Nissan Z (incl. all submodels)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn order to take full advantage of our HPFP, specific calibrations to your ECU tune file will need to be made. Once the HPFP is installed, the engine will start and run, however a qualified engine calibrator must review datalogs to verify the engine is running properly! Please contact an AMS sales representative to discuss your ECU tuning needs by emailing\u003cspan\u003e \u003c\/span\u003esales@amsperformance.com.\u003c\/li\u003e\n\u003cli\u003ePlease be aware that there are two separate instruction guide files available for this product. The first is a physical installation guide, and the second is a calibration quick-start guide.\u003c\/li\u003e\n\u003cli\u003e240 bar maximum operating pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¹ Limited Lifetime Warranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNostrum High Performance warrants to the consumer that this product will be free from defects in materials and workmanship for the lifetime of the product.  This Limited Lifetime Warranty is limited to the repair or replacement of the part. In no event shall the manufacturer be responsible for special, incidental or consequential damages or costs incurred due to failure of this product. Limited Lifetime Warranty claims to the manufacturer must be transportation prepaid and accompanied with dated proof of purchase. This Limited Lifetime Warranty applies only to the original purchaser of the product and is non-transferable.\u003c\/li\u003e\n\u003cli\u003eProducts will be repaired or replaced when determined by the manufacturer that the product failed because of defects in material or workmanship. Limited Lifetime Warranty explicitly excludes the cost of labor for product installation and removal, diagnostics, or troubleshooting.\u003c\/li\u003e\n\u003cli\u003eThe Limited Lifetime Warranty covers manufacturing defects, but damage caused by foreign object debris, from other fuel line components or installation contamination, will not be covered under this limited warranty.\u003c\/li\u003e\n\u003cli\u003eNo warranty, express or implied, shall extend to any product which has been subjected to misuse, neglect, accident, or improper storage or installation or which has been repaired, modified, altered, tampered with, misused, improperly installed, or used in an improper application. The manufacturer disclaims any liability for consequential damages due to breach of any written or implied warranty on all products made by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eTo begin the warranty process, you may contact an AMS Performance Customer Support Representative\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/support\"\u003eHERE\u003c\/a\u003e. The following additional information will be required to process the Limited Lifetime Warranty claim and confirm eligibility to provide further warranty inspection.\u003cbr\u003e– Original invoice, purchase date, and product installation date.\u003cbr\u003e– Diagnostic information, testing data, codes, freeze data.\u003cbr\u003e– ECU calibration file (if possible)\u003cbr\u003e– Data logs of the event\u003cbr\u003e– Full mod list including part specifics\u003cbr\u003e– Persons\/company that tuned the vehicle\u003c\/li\u003e\n\u003cli\u003eOnce approved, a Nostrum High Performance RMA form is required to be filled out and included with the returned part. Additional information may be required in order to test the failed component and process the claim. All approved components will be be shipped directly to Nostrum High Performance at the expense of the consumer for inspection and subsequent repair or replacement if deemed necessary.\u003c\/li\u003e\n\u003cli\u003eIn the case that the product requires inspection performance testing and no damage, fault, or defect in operation is found, Nostrum High Performance, at its sole discretion, may apply a Test Service Charge of $125.00 USD and shipping will be the sole responsibility of the consumer. Payment of this fee directly to Nostrum High Performance is required prior to the return of the inspected product to the consumer.\u003c\/li\u003e\n\u003cli\u003eFor further warranty information, please see\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/nostrumshop.com\/warranty\/\" target=\"_blank\"\u003enostrumshop.com\/warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWARNING\/DANGER\u003c\/u\u003e\u003c\/strong\u003e: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED\u003cstrong\u003e\u003cem\u003e ONLY\u003c\/em\u003e\u003c\/strong\u003e BY A \u003cstrong\u003e\u003cem\u003eQUALIFIED MOTORSPORT TECHNICIAN\u003c\/em\u003e\u003c\/strong\u003e. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.\u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":48011699060890,"sku":"ALP.28.07.0001-3","price":1699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_43_AMS-Stage-2-VR30-HPFP-7.jpg?v=1778508616"},{"product_id":"ams-performance-vr30ddtt-stage-2-high-pressure-fuel-pump-copy","title":"AMS Performance VR30DDTT Stage 3 High Pressure Fuel Pump","description":"\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eCFD-optimized, E-85 compatible, and all laser-welded stainless steel construction.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIt’s simple, if you want to make more power you are going to need more fuel. The AMS Performance VR30DDTT Stage 3 High Pressure Fuel Pump features high quality all stainless steel construction and is capable of fuel flow at over 405 liters per hour and allows for 240 bar of fuel pressure.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003ePartnering with Nostrum High Performance, an industry leader in fuel system technology, we have been able to bring reliable high-performance high-pressure fueling solutions to the VR30 platform. The AMS Performance VR30DDTT Stage 3 High-Pressure Fuel Pump allows for fuel flow supporting our ALPHA 6 or RA600 packages for the Nissan Z and Infiniti Q50\/Q60, or for builds looking to maximize performance over 600 WHP on e85. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eSuited for Max Effort ALPHA 6\/RA600 Packages or Higher\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGreat for 600+ WHP Builds on E85\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eE-85 \/ Flex Fuel Compatible\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCapable of Flowing Over 405 LPH\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e240 Bar Maximum Operating Pressure\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCFD Optimized Design\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eAll Stainless Steel Construction\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eLaser Welds Mean the Pump is Sealed with no Leaks\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eLimited Lifetime Warranty¹\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eComes Fully Assembled\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMounting Flange and Electric Harness Adapter Included\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGas line shaping tool Included\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eAlso Includes Installation Hardware\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUtilizes OEM-type Low and High Pressure Fittings\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eEach Individual Unit is Flow Tested\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered to be the Best\u003c\/h3\u003e\n\u003cp\u003eWe partnered with an industry leader in fuel systems,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.nostrumshop.com\/\" rel=\"noopener\" target=\"_blank\"\u003eNostrum High Performance\u003c\/a\u003e, in the development of this component. For this reason our customers know that they can rely on our fuel pumps to be the best built, best performing on the market.\u003c\/p\u003e\n\u003cp\u003eThrough the use of Computational Fluid Dynamics (CFD) the AMS Performance VR30DDTT Stage 3 High Pressure Fuel Pump mapping shows the optimized fuel flow trajectories. This high pressure pump flows an incredible 405 LPH!\u003c\/p\u003e\n\u003cp\u003eThe AMS VR30 pumps come fully assembled for a quick, bolt-on upgrade and uses all OEM type fuel fittings and electrical connectors. The AMS Performance VR30DDTT Stage 3 High Pressure Fuel Pump utilizes OEM-type low and high pressure fittings. Each individual pump is flow tested to insure the ultimate in performance, and comes with comprehensive installation instructions. The pump has an incredible maximum pressure of 240 bar!\u003c\/p\u003e\n\u003ch3\u003ePut it to the Test\u003c\/h3\u003e\n\u003cp\u003eWhat sets this and every AMS component apart from the competition is our rigorous battery of tests. The AMS Performance VR30DDTT Stage 3 High Pressure Fuel Pump has been tested in-house with countless 1\/4 and 1\/2 mile runs! In addition to this research and development testing, all AMS VR30 High Pressure Fuel Pumps are bench tested by Nostrum High Performance before shipping as part of their extensive quality control process to ensure the highest level of durability. The best part — a Limited Lifetime Warranty¹ against manufacturer’s defects is included at no additional cost.\u003c\/p\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn order to take full advantage of our HPFP, specific calibrations to your ECU tune file will need to be made. Once the HPFP is installed, the engine will start and run, however a qualified engine calibrator must review datalogs to verify the engine is running properly! Please contact an AMS sales representative to discuss your ECU tuning needs by emailing\u003cspan\u003e \u003c\/span\u003esales@amsperformance.com.\u003c\/li\u003e\n\u003cli\u003eVehicles equipped with an\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"201\" data-end=\"222\"\u003eAMS Flex Fuel Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edo not require the additional low pressure feed line. For\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"280\" data-end=\"314\"\u003enon-AMS or no flex fuel setups\u003c\/strong\u003e, a\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"318\" data-end=\"349\"\u003e-6AN low-pressure feed line\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis required for HPFP installation. This can be added via the dropdown menu.\u003c\/li\u003e\n\u003cli\u003ePlease be aware there are two separate instruction guide files available for this product. The first is a physical installation guide, and the second is a calibration quick-start guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¹ Limited Lifetime Warranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNostrum High Performance warrants to the consumer that this product will be free from defects in materials and workmanship for the lifetime of the product.  This Limited Lifetime Warranty is limited to the repair or replacement of the part. In no event shall the manufacturer be responsible for special, incidental or consequential damages or costs incurred due to failure of this product. Limited Lifetime Warranty claims to the manufacturer must be transportation prepaid and accompanied with dated proof of purchase. This Limited Lifetime Warranty applies only to the original purchaser of product and is non-transferable.\u003c\/li\u003e\n\u003cli\u003eProducts will be repaired or replaced when determined by the manufacturer that the product failed because of defects in material or workmanship. Limited Lifetime Warranty explicitly excludes the cost of labor for product installation and removal, diagnostics, or troubleshooting.\u003c\/li\u003e\n\u003cli\u003eThe Limited Lifetime Warranty covers manufacturing defects, but damage caused by foreign object debris, from other fuel line components or installation contamination, will not be covered under this limited warranty.\u003c\/li\u003e\n\u003cli\u003eNo warranty, express or implied, shall extend to any product which has been subjected to misuse, neglect, accident, or improper storage or installation or which has been repaired, modified, altered, tampered with, misused, improperly installed, or used in an improper application. The manufacturer disclaims any liability for consequential damages due to breach of any written or implied warranty on all products made by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eTo begin the warranty process, you may contact an AMS Performance Customer Support Representative\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/support\"\u003eHERE\u003c\/a\u003e. The below listed additional information will be required to process the Limited Lifetime Warranty claim and confirm eligibility to provide further warranty inspection.\u003cbr\u003e– Original invoice, purchase date, and product installation date.\u003cbr\u003e– Diagnostic information, testing data, codes, freeze data.\u003cbr\u003e– ECU calibration file (if possible)\u003cbr\u003e– Data logs of the event\u003cbr\u003e– Full mod list including part specifics\u003cbr\u003e– Persons\/company that tuned the vehicle\u003c\/li\u003e\n\u003cli\u003eOnce approved, a Nostrum High Performance RMA form is required to be filled out and included with the returned part. Additional information may be required in order to test the failed component and process the claim. All approved components will be shipped directly to Nostrum High Performance at the expense of the consumer for inspection and subsequent repair or replacement if deemed necessary.\u003c\/li\u003e\n\u003cli\u003eIn the case that the product requires inspection performance testing and no damage, fault, or defect in operation is found, Nostrum High Performance, at its sole discretion, may apply a Test Service Charge of $125.00 USD and shipping will be the sole responsibility of the consumer. Payment of this fee directly to Nostrum High Performance is required prior to the return of the inspected product to the consumer.\u003c\/li\u003e\n\u003cli\u003eFor further warranty information, please see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/nostrumshop.com\/warranty\/\" rel=\"noopener\" target=\"_blank\"\u003enostrumshop.com\/warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWARNING\/DANGER\u003c\/u\u003e\u003c\/strong\u003e: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED\u003cstrong\u003e\u003cem\u003e ONLY\u003c\/em\u003e\u003c\/strong\u003e  BY A\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eQUALIFIED MOTORSPORT TECHNICIAN\u003c\/em\u003e\u003c\/strong\u003e. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.\u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"No I already have an AMS Flex Fuel Kit or Will Custom Fabricate my own Fuel Lines","offer_id":48011724357786,"sku":"ALP.28.07.0001-2","price":2589.95,"currency_code":"USD","in_stock":true},{"title":"Yes I need the Low Pressure Feed Line","offer_id":48011724390554,"sku":"ALP.28.07.0001-4","price":2675.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_21_AMS_Alpha_big_bore_kit-3_small_be052e61-1846-40e7-bdc6-17d981a686cd.jpg?v=1778510007"},{"product_id":"ams-performance-vr30ddtt-stage-3-high-pressure-fuel-pump-copy","title":"AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump","description":"\u003ch3\u003e\u003cem\u003eCFD-optimized, E-85 compatible, and all laser welded stainless steel construction.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhen the goal is to make significantly more power, increased high pressure fuel capacity becomes essential. The AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump was engineered to meet the demands of max-effort builds, supporting ALPHA 8+ packages and delivering the fuel volume required for 700+ WHP on E85.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eFeaturing the largest piston in the lineup at a massive 12 mm, the Stage 4 pump delivers market-leading fuel delivery as the highest flowing pump available at an exceptional 440 LPH. Its CFD optimized design is capable of operating at up to 250 bar and is paired with all stainless steel, laser welded construction for precise, leak-free performance.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eEvery unit comes fully assembled, individually flow tested, and includes OEM-style and AN fuel line fittings, a harness adapter, a gas line shaping tool, and all necessary installation hardware. To ensure a smooth, trouble-free upgrade, installation and calibration guides are included. Ethanol and flex-fuel compatibility, combined with a Limited Lifetime Warranty¹, make this the most complete, reliable, and highest performing high pressure fueling solution available for the VR30 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eSupports Max-Effort ALPHA 8+ Packages and 700+ WHP E85 Builds\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eMassive 12mm Piston Providing Maximum Fuel Throughput\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eThe Highest Flowing Pump on the Market at an Astounding 440 LPH\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eCFD Optimized Design with 250 Bar Maximum Operating Pressure\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eAll Stainless Steel Laser Welded Construction for Leak-free Sealing\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eFully Ethanol E85 and Flex Fuel Compatible\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eIncludes Harness Adapter, Gas Line Shaping Tool, and Installation Hardware\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eComes Fully Assembled and Individually Flow Tested\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eIncluded Install and Calibration Guides For a Simple, Hassle-free Install\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eBacked by a Limited Lifetime Warranty¹\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered to be the Best\u003c\/h3\u003e\n\u003cp data-end=\"413\" data-start=\"122\"\u003eWe partnered with\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.nostrumshop.com\/\" target=\"_blank\"\u003eNostrum High Performance\u003c\/a\u003e, one of the industry’s most respected leaders in fuel system engineering, during the development of this component. This collaboration allows our customers to trust that our fuel pumps are among the best built and best performing options available.\u003c\/p\u003e\n\u003cp data-end=\"668\" data-start=\"415\"\u003eUsing advanced Computational Fluid Dynamics (CFD), the AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump was engineered with optimized internal fuel flow trajectories for maximum efficiency. This results in an impressive flow capacity of 440 LPH.\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"1224\" data-start=\"670\"\u003eEach AMS VR30 pump arrives fully assembled for a quick, bolt-on upgrade and includes both OEM and AN fuel fittings, along with OEM type electrical connectors for seamless integration. This allows the pump to function properly within the factory system while providing flexibility for custom fuel system setups. Every unit is individually flow tested to verify performance and reliability, and each includes comprehensive installation instructions. The pump is capable of reaching a maximum pressure of 250 bar, delivering the headroom required for high power VR30 applications.\u003c\/p\u003e\n\u003ch3\u003ePut it to the Test\u003c\/h3\u003e\n\u003cp\u003eWhat truly sets this, and every AMS component, apart from the competition is our uncompromising commitment to validation. The AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump has endured a rigorous battery of in-house tests, including countless 1\/4-mile and 1\/2-mile passes designed to push the system to its limits. Beyond our own research and development efforts, each AMS VR30 High Pressure Fuel Pump is individually bench tested by Nostrum High Performance prior to shipping. Their state-of-the-art quality control process ensures exceptional durability, consistency, and performance long before the pump ever reaches your vehicle. To give you even greater peace of mind, every pump includes a Limited Lifetime Warranty¹ against manufacturer defects at no additional cost.\u003c\/p\u003e\n\u003cp\u003eFor a deeper look into the craftsmanship behind these components, we highly recommend watching the behind-the-scenes video below. You will get an inside look at Nostrum’s world-class facility, including their manufacturing, testing, R\u0026amp;D, and quality control processes that help make this fuel pump one of the most reliable and trusted solutions in the industry.\u003c\/p\u003e\n\u003ch3\u003eProduct Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn order to take full advantage of our HPFP, specific calibrations to your ECU tune file will need to be made. Once the HPFP is installed, the engine will start and run, however a qualified engine calibrator must review datalogs to verify the engine is running properly! Please contact an AMS sales representative to discuss your ECU tuning needs by emailing\u003cspan\u003e \u003c\/span\u003esales@amsperformance.com.\u003c\/li\u003e\n\u003cli\u003eVehicles equipped with an\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"222\" data-start=\"201\"\u003eAMS Flex Fuel Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edo not require the additional low pressure feed line. For\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"314\" data-start=\"280\"\u003enon-AMS or no flex fuel setups\u003c\/strong\u003e, a\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"349\" data-start=\"318\"\u003e-6AN low-pressure feed line\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis required for HPFP installation. This can be added via the dropdown menu.\u003c\/li\u003e\n\u003cli\u003ePlease be aware there are two separate instruction guide files available for this product. The first is a physical installation guide, and the second is a calibration quick-start guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¹ Limited Lifetime Warranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNostrum High Performance warrants to the consumer that this product will be free from defects in materials and workmanship for the lifetime of the product.  This Limited Lifetime Warranty is limited to the repair or replacement of the part. In no event shall the manufacturer be responsible for special, incidental, or consequential damages or costs incurred due to failure of this product. Limited Lifetime Warranty claims to the manufacturer must be prepaid for transportation and accompanied with dated proof of purchase. This Limited Lifetime Warranty applies only to the original purchaser of product and is non-transferable.\u003c\/li\u003e\n\u003cli\u003eProducts will be repaired or replaced when determined by the manufacturer that the product failed because of defects in material or workmanship. Limited Lifetime Warranty explicitly excludes the cost of labor for product installation and removal, diagnostics, or troubleshooting.\u003c\/li\u003e\n\u003cli\u003eThe Limited Lifetime Warranty covers manufacturing defects, but damage caused by foreign object debris, from other fuel line components or installation contamination, will not be covered under this limited warranty.\u003c\/li\u003e\n\u003cli\u003eNo warranty, express or implied, shall extend to any product which has been subjected to misuse, neglect, accident, or improper storage or installation or which has been repaired, modified, altered, tampered with, misused, improperly installed, or used in an improper application. The manufacturer disclaims any liability for consequential damages due to breach of any written or implied warranty on all products made by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eTo begin the warranty process, you may contact an AMS Performance Customer Support Representative\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/support\"\u003eHERE\u003c\/a\u003e. The below listed additional information will be required to process the Limited Lifetime Warranty claim and confirm eligibility to provide further warranty inspection.\u003cbr\u003e– Original invoice, purchase date, and product installation date.\u003cbr\u003e– Diagnostic information, testing data, codes, freeze data.\u003cbr\u003e– ECU calibration file (if possible)\u003cbr\u003e– Data logs of the event\u003cbr\u003e– Full mod list including part specifics\u003cbr\u003e– Persons \/ company that tuned the vehicle\u003c\/li\u003e\n\u003cli\u003eOnce approved, a Nostrum High Performance RMA form is required to be filled out and included with the returned part. Additional information may be required in order to test the failed component and process the claim. All approved components will be be shipped directly to Nostrum High Performance at the expense of the consumer for inspection and subsequent repair or replacement if deemed necessary.\u003c\/li\u003e\n\u003cli\u003eIn the case that the product requires inspection performance testing and no damage, fault, or defect in operation is found, Nostrum High Performance, at its sole discretion, may apply a Test Service Charge of $125.00 USD and shipping will be the sole responsibility of the consumer. Payment of this fee directly to Nostrum High Performance is required prior to the return of the inspected product to the consumer.\u003c\/li\u003e\n\u003cli\u003eFor further warranty information, please see\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/nostrumshop.com\/warranty\/\" target=\"_blank\"\u003enostrumshop.com\/warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWARNING\/DANGER\u003c\/u\u003e\u003c\/strong\u003e: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED\u003cstrong\u003e\u003cem\u003e ONLY\u003c\/em\u003e\u003c\/strong\u003e  BY A\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eQUALIFIED MOTORSPORT TECHNICIAN\u003c\/em\u003e\u003c\/strong\u003e. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AMS Performance","offers":[{"title":"No I already have an AMS Flex Fuel Kit or Will Custom Fabricate my own Fuel Lines","offer_id":48011727470746,"sku":null,"price":2999.0,"currency_code":"USD","in_stock":true},{"title":"Yes I need the Low Pressure Feed Line","offer_id":48011727503514,"sku":"ALP.28.07.0001-6","price":3085.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/files\/imgi_21_AMS_Alpha_big_bore_kit-3_small_be052e61-1846-40e7-bdc6-17d981a686cd.jpg?v=1778510007"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0078\/5553\/8249\/collections\/Nissan-Z-Nismo-3-1374910780.jpg?v=1778504337","url":"https:\/\/trackuza.com\/collections\/nissan-z.oembed","provider":"TRACKUZA LLC","version":"1.0","type":"link"}